What Dies do I Need for my DK98 (Older Model) KAM Table Press

The DK98 KAM table press is an older model has holes to accept the following die shanks:

• Top die shank: approx 9mm (3/8") diameter (requires allen wrench)
• Bottom die shank: approx 12mm (1/2") diameter

If you have this press, you will first need the DK98-KX adapter set in order for the majority of our dies to fit the press.  (Only 1 adapter is needed per press.)

Then, click on the specific fastener from the list in the master buying guide for the direct links to the dies needed.